Elastomeric Liquid Applied Membrane System AcryShield 60 Technical Data Sheet - September 2026, Version 1.2.3 Page 1 of 3 Description The AcryShield 60 is an elastomeric single component liquid applied waterproofing membrane based on aliphatic acrylic resins for elastic and durable features. AcryShield 60 has excellent adhesion to most substrates including concrete, plaster, masonry, and metal surfaces. The membrane formed by application of AcryShield 60 is resistant to ultra violet rays. This allows the product to perform perfectly in direct sun light. Therefore it can be applied to building roofs, hanger roofs, factories, stores and metal sheds. Key Features ■ Matt . ■ Excellent weather resistance. ■ Highly flexible to be applied where movement isexpected. ■ Improves the working environment. ■ Solvent-free. ■ Durable and hardwearing. ■ Anti- carbonation of concrete.. ■ Limited maintenance. ■ Easy to apply. ■ Available in a wide range of colours by RAL . ■ High build, odorless liquid applied membrane in single application. Application Instructions Surface Preparation: Surface preparation plays a vital role in determining the durability of any coating. Therefore proper care should be taken while executing it. The concrete should be a minimum of 28 days old before any coating or toppings are applied. The surface should be free from dust, dirt, rust, curing compound, oil etc. We recommend captive shot blasting as the most suitable preparation. Priming: On most new concrete floors priming may not be required, however for the best adhesion, Prepare the surface with a water-diluted AcryShield 60 solution and allow to dry. Mixing & Application: is a ready to use single component product. To ensure full homogenous mix, shake the pail while closed or mix slowly for 3-5 minutes using a paddle with slow speed drill till a homogenous mix is reached ,leave the mixed material for a period of 2 minutes to release the entrapped air within the mix before application. • On top of concrete surface, it is recommended to perform proper cleaning of the substrate to ensure it is free from contaminants and curing compound residue. • On top of Polyurethane foam, ensure that the surface of the foam is clean, free of dust or contamination. If the PU foam was shaved to slope, ensure the surface is clean without residual before applying AcryShield 60 . • Over bituminous membranes on roofs, ensure the membrane is clean, free from contaminants and has no de-bonding blisters. • Over steel surfaces, it is recommended to prepare the steel by mechanical means or blasting to ensure proper adhesion. AcryShield 60 should not be applied on surfaces with a risk of rising dampness. Be aware that all Water test should be run after 14 days of material application to allow the membrane to be fully cured.Additional coat of product should be applied around penetrations such as pipes and conduits to ensure proper sealing and waterproofing features. In applications where movement and foot traffic is expected over the roof, it is recommended to embed a ChemSheild PF in the first coat while fresh. Apply the second coat to cover the mesh fully and ensure proper thickness of material applied. For porous substrate, or in a very hot climate, it is recommended to apply the first coat of AcryShield 60 diluted with 20% of water.